Do you own a room that could use a ceiling fan to cool it down Adding a ceiling fan on your own is relatively easy, if you are basically replacing a light fixture that is already in the correct location. Because a ceiling fan needs the same wiring as your light fixture, the only major thing that requires to be done is to transfer the workbox that can handle the weight of the ceiling fan. Hanging your brand new ceiling fan on an pre-existing box that won't support the extra weight of the fan could end up in disaster woodworking plans. Before you perform anything, read the instructions for your fan very carefully and make sure you have the necessary tools.

If you are setting up the fan on a cathedral ceiling, you may want to acquire additional parts for extending the fan straight down lower. When you have all the stuff prepared, the very first thing you ought to do is make sure that the breaker is switched off so no power goes to the light fixture. After eliminating the current light fixture, check to see if the installed workbox can tackle the weight of your ceiling fan. Most workboxes are not aimed for ceiling fans, you will need additional support. Adding support to the workbox is not that difficult if you have entry to the light fixture from the attic.

To add support, you simply nail a 2x4 involving the ceiling rafters in order that it touches the top of the workbox. The moment the 2x4 is well anchored, attach the workbox to the 2x4. If everything is performed correctly, the excess weight of the fan will now be totally supported by the wood and the screws. If you dont possess admission to the attic, you will ought to place a cross bracing in your ceiling. It is more hard to do and may not be that secure but its the ideal option if you have no attic admittance.

So now, after constructing the fan as stated by the instructions, you are ready to hang the new fan. The difficult part is hooking up the wiring while retaining the fan. Based on the fan, most come with a clinging frame, and others include a bracket with a J hook that lets you dangle the motor housing. The majority of fans, you will see a wall mount switch along with a chain to control the speed of the fan. If you also install a light kit with the fan, each can be operated by a wall switch or chain.

The next thing is to follow the wiring details which are as simple as hooking up two white wires, two black wires and two ground wires. Once you have completed putting together the fan and cabling, the last step is to attach the fan blades. Immediately after you attach the blades, the only thing left is to flip the breaker back on to find out if you did it right.